Q: What is the Jakarta Mail API?
A: The Jakarta Mail API is a set of abstract APIs that model a mail system. (Jakarta Mail was previously known as JavaMail.) The API provides a platform independent and protocol independent framework to build Java technology based email client applications. The Jakarta Mail API provides facilities for reading and sending email. Service providers implement particular protocols. Several service providers are included with the Jakarta Mail API package; others are available separately. The Jakarta Mail API is implemented as a Java optional package that can be used on JDK 1.4 and later on any operating system. The Jakarta Mail API is also a required part of the Jakarta EE Platform and the Java Platform, Enterprise Edition (Java EE).

Q: How do I get an implementation of the Jakarta Mail API?
A: Eclipse provides an open source implementation that developers may use and ship. The implementation includes the core Jakarta Mail packages and IMAP, POP3, and SMTP service providers. The implementation may be downloaded here.

Q: How do I send feedback or comments?
A: Send email to mail-dev@eclipse.org.

Q: Where is javax.activation?
A: javax.activation is part of the JavaBeans Activation Framework (JAF) and is included in Java SE 6 through Java SE 10. The Jakarta Mail API uses JAF for data content handling.

Q: What JDK does the Jakarta Mail API need?
A: The Jakarta Mail API requires JDK/JRE 1.7 or higher. The Jakarta Mail API is a Java optional package, it is not part of the core Java SE but is included in Java EE and Jakarta EE.

Q: Where can I find a version of Jakarta Mail for my favorite operating system?
A: Jakarta Mail is completely written in Java and will run on any operating system that supports the required version of the JDK. No special version is needed for different operating systems.

Q: Do the Jakarta Mail APIs work in web browsers?
A: Jakarta Mail will work in any browser that supports the required JDK version. The Java Plug-in may be required to provide such support.

Q: Can I use Jakarta Mail to read mail from my web mail account (such as Yahoo or Hotmail)?
A: It depends. Many web-based email services provide access only using a browser with HTTP. These services cannot be accessed using Jakarta Mail. If the service also provides POP3 or IMAP access, Jakarta Mail can probably be used to access it. Contact your web email service provider for details. Another helpful tool is MrPostman, a proxy server that provides POP3 access to Hotmail and Yahoo! Mail, available at http://sourceforge.net/projects/mrpostman/

Q: What is IMAP?
A: IMAP stands for Internet Message Access Protocol. It is a method of accessing electronic mail messages stored on a (possibly shared) mail server. In other words, it permits a "client" email program to access remote message stores as if they were local. IMAP is defined by RFC2060.

Q: What is SMTP?
A: SMTP stands for Simple Mail Transfer Protocol. It is used to transfer RFC822-style messages between different mail hosts as well as to submit new messages to a host for delivery. SMTP is in very wide use (it originated in 1982) and is defined by RFC821.

Q: What is MIME?
A: MIME and RFC822 are the standards for describing email messages that are sent across the Internet. The javax.mail.internet subpackage (which is part of the Jakarta Mail APIs) provides a complete implementation of these two packages. MIME is specified by the following RFCs: RFC2045, RFC2046, RFC2047.

Q: What is POP3?
A: POP3 stands for Post Office Protocol version 3. POP3 is a very limited protocol for accessing a single mailbox. It is much less capable than IMAP. POP3 is very widely used and is defined by RFC1939.

Q: What about support for MAPI, NNTP, Lotus Notes, and other service providers?
A: We have no current plans to implement any of these providers. However, the architecture of the Jakarta Mail APIs provides for being able to easily plug-in third-party service providers. It is our hope that third-parties will embrace the Jakarta Mail APIs by writing providers for other standard and proprietary protocols. See our Third Party Products page for the latest list of such providers.

Q: How do I store mail messages on my local disk?
A: A "local store provider" can be used to store mail messages on a local disk. The Jakarta Mail API download does not include such a provider but a provider that supports the Unix mbox format is available in the Jakarta Mail source repository that you can build yourself. See this page for details. In addition, several local store providers are available from third parties for different local store formats such as MH and Mbox. See our Third Party Products page for the latest list of such providers.

Q: Where do I find documentation on the protocol providers?
A: The protocol providers for IMAP, POP3, and SMTP support many features that are not part of the Jakarta Mail API specification. The documentation for these protocol providers is included in the Jakarta Mail javadocs. The package level documentation for each protocol provider package describes the properties that are supported by the protocol proivder. In addition, the protocol providers include some classes and methods that applications can use to take advantage of provider-specific features. Note that use of these properties, classes, and methods renders a program non-portable; it may only work with Oracle's implementation of the Jakarta Mail API. See the IMAP, POP3, and SMTP package javadocs for details.

Q: Is the Jakarta Mail API implementation completely free? Can I ship it along with my product?
A: Yes. The Jakarta Mail API implementation is completely free and open source and you can include it in your product. This release includes IMAP, POP3, and SMTP providers as well. Please do read the license and ensure that you understand it. The Jakarta Mail license is described here.

Q: Can I get the source code for the Jakarta Mail API implementation?
A: Starting with Jakarta Mail 1.4.2, the source code for the Jakarta Mail API Reference Implementation is available under the CDDL or GPL open source licenses in the Jakarta Mail project.

Q: Is Jakarta Mail Y2K compliant?
A: Yes. Oracle's Jakarta Mail implementation is Option-3 Y2K compliant. Please see the NOTES.txt file in the Jakarta Mail package for more information.

Q: The answer to my question isn't here, where else should I look?
A: In addition to the Jakarta Mail API spec and javadocs (available from our main web page), don't forget to check the README.txt and NOTES.txt files for additional important information.

You can reach the Jakarta Mail team directly at mail-dev@eclipse.org. You can use this address to report bugs. Bugs can also be reported using the Issue Tracker at the Jakarta Mail project.

The Oracle Technology Network maintains a Jakarta Mail forum, see the Jakarta Mail Forum.

jGuru also maintains a Jakarta Mail FAQ, which you'll find at http://www.jguru.com/faq/Jakarta Mail, although it hasn't been updated in several years.

Installation and Configuration

Q: How do I install the Jakarta Mail API implementation?
A: Download the [Jakarta Mail jar file](https://github.com/eclipse-ee4j/mail/releases/download/1.6.4/jakarta.mail.jar) and edit your CLASSPATH environment variable to include the jakarta.mail.jar file. You will also need an implementation of the JavaBeans Activation Framework (see below) unless you're using JDK 1.6 through JDK 10 (which includes JAF). See the README.txt file for additional details and examples, as well as the following FAQ entry.

Q: I get a ClassNotFoundException when I run my program.
A: You haven't set CLASSPATH properly. See Setting the class path (Windows) or Setting the class path (Solaris/Linux) in the JDK documentation. Note that if you're running your program using "java -jar", the CLASSPATH environment variable setting is ignored. In that case you'll need to add the "-classpath" argument to the java command, or add the Class-Path header to the manifest file of your jar file. See the Java Tutorial and this Wikipedia article for more information.

Q: I get a ClassNotFoundException for a javax.activation class when I run my program on JDK 9 or 10. [new!]
A: JDK 9 and 10 hide many of the javax.* classes by default. You need to use the java command line option --add-modules java.activation to enable access the the javax.activation (JAF) classes. (Note that there's no "x" in the module name.) Or, you need to include the jakarta.activation.jar file in your CLASSPATH.

Q: How do I set my CLASSPATH on Windows?
A: Detailed instructions are available here

Q: How do I add the Jakarta Mail library to my NetBeans Java Project?
A: Use the Library Manager to create a library and add a reference to that library to your project.

Inside Netbeans, open the Library Manager (Tools > Libraries from the main menu bar).
Select <New Library...>
Enter a library name, e.g., "Jakarta Mail", and hit <OK>. Do not check server library.
Make sure the new library is selected under "Libraries" on the left.
Select the "Classpath" tab on the right and choose <Add Jar/Folder...>
Using the file browser, select the jakarta.mail.jar that you downloaded, and hit <Add Jar/Folder> to accept.
Select the "Javadoc" tab and choose <Add ZIP/Folder...>
Using the file browser, select the folder where the Jakarta Mail javadoc index files are, and hit <Add ZIP/Folder> to accept.
If you downloaded the Jakarta Mail source code, you can set the source code reference on the "Sources" tab. This can be helpful for debugging. Using the file browser, select the source root for the Jakarta Mail sources and hit <Add Jar/Folder> to accept.

Note: If you are using JDK 1.5.0 or earlier you will need to add the JavaBeans Activation Framework library as well. You can create a separate library in a manner similar to the above, or just add activation.jar (and javadoc/source references if desired) to this library definition.

Now add a reference to this library to your project.

Open your project in NetBeans and make sure the "Projects" tab is visible.
Right click your project in the project explorer and select "Properties"
In the Properties dialog, select "Libraries" in the tree on the left and make sure the "Compile" tab is selected.
Click <Add Library...>
Locate and select the library you created above and click "Add Library". It should be added to the list of compile-time libraries.
Click "OK" and you're done.

Q: How do I add the Jakarta Mail library to my Eclipse Java Project?
A: Create a "user library" for Jakarta Mail and add a reference to that library to your project.

From the Eclipse main menu, open Window > Preferences
Open the tree to Java > Build Path > User Libraries and select the <User Libraries> node.
Choose <New...> from the panel on the right
In the new library dialog, enter a user library name, e.g. "Jakarta Mail", and hit <OK>. Do not check system library.
Make sure the new library is selected and choose <Add Jars...>
Browse to where Jakarta Mail is installed and select jakarta.mail.jar
Select <Javadoc location: (None)> and hit <Edit...> to add a reference to the javadoc location. This can be found at docs/javadocs under the same folder where you installed Jakarta Mail.
You can also set the source code reference here if you downloaded the Jakarta Mail source code. Use ".../jakartamail-1.6.4/mail/src/main/java" as the source root for 1.6.4.
Choose <OK> to close the Preferences dialog. Jakarta Mail is now installed as a Library in Eclipse.

Now use the Jakarta Mail library in your Eclipse Java Project (Eclipse 3.4)

Open your project in Eclipse and be in the Java Perspective
Right click your project in the project explorer and select "Build Path > Configure Build Path..."
In the Properties dialog that opens, ensure Java Build Path is selected in the tree on the left and select the Libraries tab on the right
Click <Add Library...>
Select "User Library", then click <Next>
Locate and select the Jakarta Mail library added in the previous step, click "Finish", and you're done.

This article explains how to make the Jakarta Mail source code available to your Eclipse project.

Q: Does Jakarta Mail include all the necessary mail servers?
A: No, the Jakarta Mail API package does not include any mail servers. To use the Jakarta Mail API package, you'll need to have access to an IMAP or POP3 mail server (for reading mail) and/or an SMTP mail server (for sending mail). These mail servers are usually provided by your Internet Service Provider or are a part of your organization's networking infrastructure. If you don't have access to such a mail server, see below.

Q: Where can I get the necessary mail servers?
A: The University of Washington IMAP server supports multiple platforms (UNIX, Windows 32bit, etc). Get the source code from http://www.washington.edu/imap/. There are several free, all Java mail servers available, including Apache James and Java Email Server. Sendmail is a popular (non-Java) SMTP server. SubEthaSMTP is a Java library for implementing SMTP server functionality; their web page also references other mail servers. Many other vendors provide mail servers supporting Internet standards. There are also many free, public mail servers that support the required mail protocols such as Gmail, Yahoo! Mail, Hotmail, etc.

Q: What host name, user name, or password should I use?
A: We do not provide a mail server for you to use. You must use your own mail server, or one provided by your Internet Service Provider or the company you work for. Your network administrator can give you the information necessary to configure Jakarta Mail to work with your mail server.

Q: How do I configure Jakarta Mail to work through my proxy server? [updated!]
A: Starting with Jakarta Mail 1.6.0, Jakarta Mail supports accessing mail servers through a web proxy server. Set the "mail.protocol.proxy.host" and "mail.protocol.proxy.port" properties for the proxy server. Proxy server BASIC authentication is supported by setting the "mail.protocol.proxy.user" and "mail.protocol.proxy.password" properties.

In addition, if your proxy server supports the SOCKS V4 or V5 protocol (http://www.socks.nec.com/aboutsocks.html, RFC1928) and allows anonymous connections, and you're using JDK 1.5 or newer and Jakarta Mail 1.4.5 or newer, you can configure a SOCKS proxy on a per-session, per-protocol basis by setting the "mail.smtp.socks.host" property as described in the javadocs for the com.sun.mail.smtp package. Similar properties exist for the "imap" and "pop3" protocols. Authentication for SOCKS servers is supported by the JDK by setting the "java.net.socks.username" and "java.net.socks.password" System properties (and thus apply to all SOCKS connections) as describe in the JDK Networking Properties documentation.

If you're using older versions of the JDK or Jakarta Mail, you can tell the Java runtime to direct all TCP socket connections to the SOCKS server. See the Networking Properties guide for the latest documentation of the socksProxyHost and socksProxyPort properties. These are system-level properties, not Jakarta Mail session properties. They can be set from the command line when the application is invoked, for example: java -DsocksProxyHost=myproxy .... This facility can be used to direct the SMTP, IMAP, and POP3 communication from Jakarta Mail to the SOCKS proxy server. Note that setting these properties directs all TCP sockets to the SOCKS proxy, which may have negative impact on other aspects of your application.

When using older versions of Jakarta Mail, and without such a SOCKS server, if you want to use Jakarta Mail to access mail servers outside the firewall indirectly, you might be able to use a program such as connect to tunnel TCP connections through an HTTP proxy server. Configure Jakarta Mail to use the connect instance as the SOCKS server.

Q: When connecting to my mail server over SSL I get an exception like "unable to find valid certification path to requested target".
A: The full exception might look like: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target. Your server is probably using a test certificate or self-signed certificate instead of a certificate signed by a commercial Certificate Authority. You'll need to install the server's certificate into your trust store. The InstallCert program will help. A newer version of InstallCert is available here.

Alternatively, you can set the "mail.protocol.ssl.trust" property to the host name of your mail server. See the javadocs for the protocol provider packages for details.

Other common causes of this problem are:

There's a firewall or anti-virus program intercepting your request.
There's something wrong in your JDK installation preventing it from finding the certificates for the trusted certificate authorities.
You're running in an application server that has overridden the JDK's list of trusted certificate authorities.

Q: While trying to run my program on Linux I get a very strange error message and the program fails. What did I do wrong?
A: The error message often looks something like this:

Exception in thread "main"
java.lang.VerifyError:(Class:com/sun/mail/pop3/POP3Store,
method: finalize Signature :()V)
Illegal use of nonvirtual function call

The problem is due to a buggy version of the unzip command used to unzip the Jakarta Mail download package on Linux. The unzip command corrupts the jakarta.mail.jar file. Get a newer version of the unzip command, or use the JDK's jar command to unzip the package.

Q: How do I use Jakarta Mail in an application run under a SecurityManager; what permissions must I grant to the application and to Jakarta Mail?
A: When using Jakarta Mail in an environment with a SecurityManager, Jakarta Mail will sometimes fail to read the configuration files in the jakarta.mail.jar file. The JavaBeans Activation Framework may have the same problem reading configuration files from the jakarta.activation.jar file. These default configuration files are stored as "resource" files in the META-INF directory in the jar file.

There are a number of debugging techniques that can be used to determine if this is the problem. Setting the Session property "mail.debug" to true (or calling session.setDebug(true)) will cause Jakarta Mail to print debugging messages as it attempts to load each configuration file. A message of the form "DEBUG: can't load default providers file" indicates that this problem might exist. Similarly, setting the System property "javax.activation.debug" to "true" (e.g., by running the program using "java -Djavax.activation.debug=true ...") will cause JAF to print debugging messages as it attempts to load each resource file. Finally, the JDK can produce helpful debugging output by setting the system property "java.security.debug" to "access:failure" (e.g., by running the program using "java -Djava.security.debug=access:failure ..."). The command java -Djava.security.debug=help will display other security debugging options.

In addition to the permissions necessary to read the configuration files, the application (and Jakarta Mail) will also need permission to connect to the mail servers it uses. If the application uses System properties to configure Jakarta Mail (e.g., by passing the Properties object returned from System.getProperties() to the Session constructor, as many of the Jakarta Mail demo programs do), it will also need permission to use the System Properties object. Alternatively, the application can use its own Properties object and be sure to set the "mail.from" property or the "mail.user" and "mail.host" properties (see the InternetAddress.getLocalAddress() method).

To allow an application to use Jakarta Mail under a SecurityManager, the application, Jakarta Mail, and JAF will need permissions such as the following (be sure to replace the host and path names with appropriate values); add these to the security policy file used by the application:

grant {
    // following two permissions allow
    // access to default config files
    permission java.io.FilePermission
		"/path/to/jakarta.mail.jar", "read";
    permission java.io.FilePermission
		"/path/to/activation.jar", "read";
    // following to use SMTP
    permission java.net.SocketPermission
		"SMTPHOST:25", "connect,resolve";
    // following to use IMAP
    permission java.net.SocketPermission
		"IMAPHOST:143", "connect,resolve";
    // following to use POP3
    permission java.net.SocketPermission
		"POP3HOST:110", "connect,resolve";
    // following needed if System.getProperties() is used
    permission java.util.PropertyPermission
		"*", "read,write";
};

If you don't want to give the application read/write permission to System properties, but you still want to be able to use System properties to configure the application, you can give the application only "read" permission to System properties and use the following approach:

    Properties props = (Properties)System.getProperties().clone();
    props.put("mail.smtp.host", "whatever");
    // set as properties as needed
    Session session = Session.getInstance(props, null);

Q: How do I configure Tomcat to allow me to use Jakarta Mail in my web application?
A: To run a web application using Jakarta Mail, you can add the Jakarta Mail jakarta.mail.jar file and, if you're not using JDK 1.6 or newer, the JavaBeans Activation Framework jakarta.activation.jar file to the lib directory under the directory in which you installed Tomcat. This will cause Tomcat to include these jar files in its classpath automatically. For details, see JNDI Resources HOW-TO in the Tomcat documentation.

Alternatively, you can package the jakarta.mail.jar file and jakarta.activation.jar files in the lib directory of your web application package (war file).

Q: When using Jakarta Mail in my servlet, it is unable to find any of the Jakarta Mail classes. I've added jakarta.mail.jar to the server's CLASSPATH.
A: It is often necessary to completely restart the web server when changing the CLASSPATH.

Q: I'm sure I've set my CLASSPATH correctly, but I'm still getting complaints about classes that can't be found, such as com.sun.mail classes.
A: The most common cause of problems like this is having more than one copy of jakarta.mail.jar in your CLASSPATH or available to your application. In addition to checking your CLASSPATH setting, also look for copies in the jre/lib/ext directory of your JDK installation. If you're running in a web server or application server, it may be providing its own version of jakarta.mail.jar in one of its directories. You should only have one version of jakarta.mail.jar available to your application.

Q: My servlet can find the Jakarta Mail classes, but Jakarta Mail complains that it can't find a service provider for "smtp" or "imap" or address type "rfc822".
A: Usually this is because Jakarta Mail can't access the configuration files in jakarta.mail.jar, possibly because of a security permission problem; see this item for more details. Also, make sure that you haven't extracted the jakarta.mail.jar contents; you should include the unmodified jakarta.mail.jar file in the server's CLASSPATH.

Q: How do I access Gmail with Jakarta Mail?
A: Jakarta Mail is capable of sending and reading messages using Gmail. All that's required is to properly configure Jakarta Mail. I'll illustrate the proper configuration using the demo programs that come with Jakarta Mail - msgshow.java and smtpsend.java. You can use these programs for basic testing to ensure that your networking is working properly, that you can connect to the servers, that your username and password are correct, etc. This is important when debugging problems to determine whether the bug is in your code or is elsewhere.

Note that you'll need to configure your Gmail account to enable less secure apps, or you'll need to use OAuth2 authentication (which is somewhat more complex).

Let's assume your Gmail username is "user@gmail.com" and your password is "passwd".

To read mail from your Gmail Inbox, invoke msgshow as follows:

java msgshow -D -T imaps -H imap.gmail.com -U user -P passwd

By reading the msgshow.java source code, you can see how these command line arguments are used in the Jakarta Mail API. You should first try using msgshow as shown above, and once that's working move on to writing and configuring your own program to use Gmail. The following code fragment shows a simple way to incorporate the needed configuration in your application:

    String host = "imap.gmail.com";
    String username = "user";
    String password = "passwd";
    Properties props = new Properties();
    props.setProperty("mail.imap.ssl.enable", "true");
    // set any other needed mail.imap.* properties here
    Session session = Session.getInstance(props);
    Store store = session.getStore("imap");
    store.connect(host, username, password);

To connect to Gmail using the POP3 protocol instead of the IMAP protocol, simply change the host name "imap.gmail.com" to "pop.gmail.com" and change "imap" to "pop3" in the property name and protocol name in the above instructions.

To send a message through Gmail, invoke smtpsend as follows:

java smtpsend -d -S -A -M smtp.gmail.com -U user -P passwd someone@example.com

The smtpsend program will prompt for a subject and message body text. End the message body with ^D on UNIX or ^Z on Windows.

Again, you can read the smtpsend.java source code to see how the command line arguments are used in the Jakarta Mail API. The following code fragment shows a simple way to incorporate the needed configuration in your application:

    String host = "smtp.gmail.com";
    String username = "user";
    String password = "passwd";
    Properties props = new Properties();
    props.setProperty("mail.smtp.host", host);
    props.setProperty("mail.smtp.ssl.enable", "true");
    // set any other needed mail.smtp.* properties here
    Session session = Session.getInstance(props);
    MimeMessage msg = new MimeMessage(session);
    // set the message content here
    Transport.send(msg, username, password);

There is, of course, more than one way to use the Jakarta Mail API to accomplish the same goal. This should help you understand the essential configuration parameters necessary to use Gmail.

Q: Why do I get AuthenticationFailedException when accessing Gmail? [new!]
A: Most likely you failed to enable less secure apps.

Q: Why don't I see all my messages when accessing Gmail with POP3?
A: Gmail has settings that control which of your messages are available via the POP3 protocol. See the Gmail settings page to change the configuration of your Gmail account.

Q: Why doesn't search find all the messages I expect when accessing Gmail with IMAP?
A: Gmail does not fully support all IMAP features. For details see this Gmail Help page.

Q: How do I delete a message in Gmail? [new!]
A: Gmail does not follow the normal IMAP conventions for deleting messages. Marking a message as deleted and then expunging the folder simply removes the current folder's "label" from the message. The message will still appear in the "[Gmail]/All Mail" folder. To delete a message, copy the message to the "[Gmail]/Trash" folder, which will immediately remove the message from the current folder. To permanently remove a message, open the "[Gmail]/Trash" folder, mark the message deleted (msg.setFlag(Flags.Flag.DELETED, true);), and expunge the folder (folder.close(true);).

Q: How do I access Yahoo! Mail with Jakarta Mail?
A: Jakarta Mail is capable of sending and reading messages using Yahoo! Mail. All that's required is to properly configure Jakarta Mail. I'll illustrate the proper configuration using the demo programs that come with Jakarta Mail - msgshow.java and smtpsend.java.

Let's assume your Yahoo! Mail username is "user@yahoo.com" and your password is "passwd".

To read mail from your Yahoo! Mail Inbox, invoke msgshow as follows:

java msgshow -D -T imaps -H imap.mail.yahoo.com -U user@yahoo.com -P passwd

By reading the msgshow.java source code, you can see how these command line arguments are used in the Jakarta Mail API. You should first try using msgshow as shown above, and once that's working move on to writing and configuring your own program to use Yahoo! Mail. The code fragment shown above for connecting to Gmail will also work for connecting to Yahoo! Mail by simply changing the host name.

To send a message through Yahoo! Mail, invoke smtpsend as follows:

java smtpsend -d -S -A -M smtp.mail.yahoo.com -U user@yahoo.com -P passwd someone@example.com

The smtpsend program will prompt for a subject and message body text. End the message body with ^D on UNIX or ^Z on Windows.

Again, you can read the smtpsend.java source code to see how the command line arguments are used in the Jakarta Mail API. The code fragment shown above for connecting to Gmail will also work for connecting to Yahoo! Mail by simply changing the host name. There is, of course, more than one way to use the Jakarta Mail API to accomplish the same goal. This should help you understand the essential configuration parameters necessary to use Yahoo! Mail.

Also see the Yahoo! Mail help page POP server settings for Yahoo Mail

Q: How do I access Hotmail (Windows Live mail) with Jakarta Mail?
A: Jakarta Mail is capable of sending and reading messages using Hotmail. All that's required is to properly configure Jakarta Mail. I'll illustrate the proper configuration using the demo programs that come with Jakarta Mail - msgshow.java and smtpsend.java.

Let's assume your Hotmail username is "user@hotmail.com" and your password is "passwd".

To read mail from your Hotmail Inbox, invoke msgshow as follows:

java msgshow -D -T pop3s -H pop3.live.com -U user@hotmail.com -P passwd

By reading the msgshow.java source code, you can see how these command line arguments are used in the Jakarta Mail API. You should first try using msgshow as shown above, and once that's working move on to writing and configuring your own program to use Hotmail. The code fragment shown above for connecting to Gmail will also work for connecting to Hotmail by simply changing the host name.

To send a message through Hotmail, invoke smtpsend as follows:

java -Dmail.smtp.starttls.enable=true -Dmail.smtp.port=587
	smtpsend -d -A -M smtp.live.com
	-U user@hotmail.com -P passwd someone@example.com

(Note that I split the command over three lines for display, but you should type it on one line.)

The smtpsend program uses the System properties when creating the Jakarta Mail Session, so the properties set on the command line will be available to the Jakarta Mail Session.

The smtpsend program will prompt for a subject and message body text. End the message body with ^D on UNIX or ^Z on Windows.

Again, you can read the smtpsend.java source code to see how the command line arguments are used in the Jakarta Mail API. The code fragment shown above for connecting to Gmail will also work for connecting to Hotmail by simply changing the host name and changing the connect call to t.connect(host, 587, username, password). There is, of course, more than one way to use the Jakarta Mail API to accomplish the same goal. This should help you understand the essential configuration parameters necessary to use Hotmail.

For more details, search Windows Live Hotmail help for "POP3".

Q: How do I access Outlook.com with Jakarta Mail?
A: Jakarta Mail is capable of sending and reading messages using Outlook.com. All that's required is to properly configure Jakarta Mail. I'll illustrate the proper configuration using the demo programs that come with Jakarta Mail - msgshow.java and smtpsend.java.

Let's assume your Outlook.com username is "user@outlook.com" and your password is "passwd".

To read mail from your Outlook.com Inbox, invoke msgshow as follows:

java msgshow -D -T imaps -H imap-mail.outlook.com -U user@outlook.com -P passwd

By reading the msgshow.java source code, you can see how these command line arguments are used in the Jakarta Mail API. You should first try using msgshow as shown above, and once that's working move on to writing and configuring your own program to use Outlook.com. The code fragment shown above for connecting to Gmail will also work for connecting to Outlook.com by simply changing the host name.

To connect to Outlook.com using the POP3 protocol instead of the IMAP protocol, simply change the host name "imap-mail.outlook.com" to "pop-mail.outlook.com" and change the protocol name "imaps" to "pop3s" in the above instructions.

To send a message through Outlook.com, invoke smtpsend as follows:

java -Dmail.smtp.starttls.enable=true
	smtpsend -d -A -M smtp-mail.outlook.com
	-U user@outlook.com -P passwd someone@example.com

(Note that I split the command over three lines for display, but you should type it on one line.)

The smtpsend program uses the System properties when creating the Jakarta Mail Session, so the properties set on the command line will be available to the Jakarta Mail Session.

The smtpsend program will prompt for a subject and message body text. End the message body with ^D on UNIX or ^Z on Windows.

    String host = "smtp-mail.outlook.com";
    String username = "user@outlook.com";
    String password = "passwd";
    Properties props = new Properties();
    props.setProperty("mail.smtp.host", host);
    props.setProperty("mail.smtp.starttls.enable", "true");
    Session session = Session.getInstance(props);
    MimeMessage msg = new MimeMessage(session);
    // set the message content here
    Transport.send(msg, username, password);

There is, of course, more than one way to use the Jakarta Mail API to accomplish the same goal. This should help you understand the essential configuration parameters necessary to use Outlook.com. For more details, see the Outlook Blog.

Programming

Q: Where can I learn the basics about Internet email that I'll need to know to program Jakarta Mail effectively?
A: See one of the books referenced on our web page for a good background on Internet email, MIME, SMTP, IMAP, POP3, etc.

Q: Where can I find some example programs that show how to use Jakarta Mail?
A: There are many example programs available for download on the Jakarta Mail project page, including simple command line programs illustrating various aspects of the Jakarta Mail API, a Swing-based GUI application, a simple servlet-based application, and a complete web application using JSP pages and a tag library.

Q: What are some of the most common mistakes people make when using Jakarta Mail?
A: Unfortunately, the internet is full of copy and paste programmers who don't understand the code they're using, which has resulted in a lot of unnecessarily complex and often incorrect examples. The most common mistakes are:

Use of Session.getDefaultInstance. Almost all code should use Session.getInstance instead, as described below
Calling the send method on a Transport instance variable. As described below, send is a static method and ignores the Transport instance you use to call it.
Setting various socketFactory properties. Long, long ago Jakarta Mail didn't have built in support for SSL connections, so it was necessary to set these properties to use SSL. This hasn't been the case for years; remove these properties and simplify your code. The easiest way to enable SSL support in current versions of Jakarta Mail is to set the property "mail.smtp.ssl.enable" to "true". (Replace "smtp" with "imap" or "pop3" as appropriate.)
Using an Authenticator just to supply a username and password. There's really nothing wrong with using an Authenticator, it's just unnecessarily complex. A more straightforward approach is to call the connect method that takes a username and password when connecting to a Store. When sending a message, use the static Transport.send method that takes a username and password.

Q: How do I send a message with an attachment?
A: A message with attachments is represented as a MIME multipart message where the first part is the main body of the message and the other parts are the attachments. There are numerous examples showing how to construct such a message in the demo programs included in the Jakarta Mail download package. To attach a file use the attachFile method of MimeBodyPart.

Q: How do I tell if a message has attachments?
A: In the simplest case, a message of MIME type multipart/mixed with more than one body part is likely a message with attachments. As described above, there are more complex cases to consider as well. In particular, messages may have arbitrary nesting of multipart/mixed and multipart/alternative parts and may include multipart/related parts for embedded HTML and multipart/signed and/or multipart/encrypted parts for secure messages. It's up to you to decide how many of these cases you want to handle in your application before deciding that a message has an attachment. Most applications take a very simple approach to this and handle only a few of the most commonly seen cases.

Note that while it's recommended that attachments have a Content-Disposition of "ATTACHMENT", and will usually have a file name, these are not requirements. Some messages with attachments will have only one or none of these. Looking for attachments by looking for a body part with these set will fail in some cases.

In the simplest case, here's how to tell if a message has attachments:

    boolean hasAttachments(Message msg) throws MessagingException {
	if (msg.isMimeType("multipart/mixed")) {
	    Multipart mp = (Multipart)msg.getContent();
	    if (mp.getCount() > 1)
		return true;
	}
	return false;
    }

Q: How do I read a message with an attachment and save the attachment?
A: As described above, a message with an attachment is represented in MIME as a multipart message. In the simple case, the results of the Message object's getContent method will be a MimeMultipart object. The first body part of the multipart object wil be the main text of the message. The other body parts will be attachments. The msgshow.java demo program shows how to traverse all the multipart objects in a message and extract the data of each of the body parts. The getDisposition method will give you a hint as to whether the body part should be displayed inline or should be considered an attachment (but note that not all mailers provide this information). So to save the contents of a body part in a file, use the saveFile method of MimeBodyPart.

To save the data in a body part into a file (for example), use the getInputStream method to access the attachment content and copy the data to a FileOutputStream. Note that when copying the data you can not use the available method to determine how much data is in the attachment. Instead, you must read the data until EOF. The saveFile method of MimeBodyPart will do this for you. However, you should not use the results of the getFileName method directly to name the file to be saved; doing so could cause you to overwrite files unintentionally, including system files.

Note that there are also more complicated cases to be handled as well. For example, some mailers send the main body as both plain text and html. This will typically appear as a multipart/alternative content (and a MimeMultipart object) in place of a simple text body part. Also, messages that are digitally signed or encrypted are even more complex. Handling all these cases can be challenging. Please refer to the various MIME specifications and other resources listed on our main page.

Q: How do I find the main message body in a message that has attachments?
A: The following approach will handle the most common cases. Handling improperly formatted messages, messages with unknown charsets, and signed or encrypted messages, can make this much more complex.

    private boolean textIsHtml = false;

    /**
     * Return the primary text content of the message.
     */
    private String getText(Part p) throws
                MessagingException, IOException {
        if (p.isMimeType("text/*")) {
            String s = (String)p.getContent();
            textIsHtml = p.isMimeType("text/html");
            return s;
        }

        if (p.isMimeType("multipart/alternative")) {
            // prefer html text over plain text
            Multipart mp = (Multipart)p.getContent();
            String text = null;
            for (int i = 0; i < mp.getCount(); i++) {
                Part bp = mp.getBodyPart(i);
                if (bp.isMimeType("text/plain")) {
                    if (text == null)
                        text = getText(bp);
                    continue;
                } else if (bp.isMimeType("text/html")) {
                    String s = getText(bp);
                    if (s != null)
                        return s;
                } else {
                    return getText(bp);
                }
            }
            return text;
        } else if (p.isMimeType("multipart/*")) {
            Multipart mp = (Multipart)p.getContent();
            for (int i = 0; i < mp.getCount(); i++) {
                String s = getText(mp.getBodyPart(i));
                if (s != null)
                    return s;
            }
        }

        return null;
    }

You can call the getText method with a Message object (which is a Part).

Q: How do I find the attachments in a message? [new!]
A: There's a wide variety of possible MIME structures for email. A general solution can be quite complex since it would need to take into account signed and encrypted messages, among other issues. Different mailers will use different MIME structure, and of course some mailers will have bugs in how they use MIME. You need to decide which cases you need to support.

In general, multipart/alternative is used to contain different versions of the main message body, and so can be skipped because it doesn't contain any attachments. Typically, a message with attachments will have a top level multipart/mixed content with the first body part containing the main message body. The first part may be a simple text part, a multipart/alternative with text/plain and text/html parts, or a multipart/related with a text/html part and associated images.

Attachments will usually, but not always, have a Content-Disposition of attachment. Attachments will usually, but not always, have a file name.

So, a good approach to start with is to only consider messages with a top level multipart/mixed content and then consider the parts after the first part to be attachments whether they say so or not. And as I said above, signed and encrypted messages will make this more complex.

Q: How do I get all the unread messages in a folder?
A: Search for all messages with the SEEN flag not set:

	Message[] unreadMessages = folder.search(
		new FlagTerm(new Flags(Flags.Flag.SEEN), false));

Q: Should I use the isMimeType method, or should I use instanceof on the object returned by the getContent method, when deciding how to process a message part?
A: It is almost always more efficient to use the isMimeType method. The msgshow.java demo program shows how to use the isMimeType method when traversing the parts of a message.

Q: When reading a multipart message, why is the getContent method returning an IMAPInputStream (or SharedByteArrayInputStream) instead of a MimeMultipart object?
A: This usually happens because the JavaBeans Activation Framework (JAF) can't find the mailcap configuration file included in the jakarta.mail.jar file. JAF uses the thread's context class loader to look for the configuration file. If the context class loader is not set properly, this can fail. Most application servers should set the context class loader properly, but at least some versions of Tomcat do not. One workaround is to put the jakarta.mail.jar file in Tomcat's lib directory instead of including it in the war file. Another workaround is to add code such as the following to the beginning of your application:

Thread.currentThread().setContextClassLoader(this.getClass().getClassLoader());

And of course you should always make sure the message you're dealing with is a multipart message before calling the getContent method, using something like if (msg.isMimeType("multipart/*")), as described above and in this example.

Q: When I attach a file it gets a MIME type of application/octet-stream instead of the correct MIME type.
A: The FileDataSource class uses the JavaBeans Activation Framework (JAF) class MimetypesFileTypeMap to determine the MIME type of a file based on the extension of the filename. The default mapping knows about only a few extensions. You can add support for more extensions either programmatically or by adding a META-INF/mime.types configuration file to your application. For example, to map the .doc extension to the MIME type application/msword, create a META-INF/mime.types file with the single line:

application/msword doc

See the javadocs for the MimetypesFileTypeMap class for details.

Q: How do I manually set the MIME type for an attached file, for example in the case where the filename doesn't have an obvious extension?
A: Subclass the FileDataSource class and override the getContentType method. (Note that with this approach you can't use the attachFile method.)

    File file = new File("filename");
    DataSource ds = new FileDataSource(file) {
	public String getContentType() {
	    return "mytype/mysubtype";
	}
    };
    MimeBodyPart mbp = new MimeBodyPart();
    mbp.setDataHandler(new DataHandler(ds));
    mbp.setFileName(file.getName());
    mbp.setDisposition(Part.ATTACHMENT);

Q: How do I create a multipart message with a part of any MIME type I choose?
A: The Jakarta Mail API includes builtin support for the most common MIME types, but to create a message that includes data in a MIME type that Jakarta Mail does not already understand, you'll need to supply that data to Jakarta Mail in a byte stream format. The ByteArrayDataSource class in the javax.mail.util pacakge in Jakarta Mail 1.4 and later, or included in source code in the demo directory of older versions of the Jakarta Mail download package, can help. This class will take a String, byte array, or InputStream and create a DataSource object that you can use as follows:

    MimeBodyPart mbp = new MimeBodyPart();
    String data = "any ASCII data";
    DataSource ds = new ByteArrayDataSource(data, "application/x-any");
    mbp.setDataHandler(new DataHandler(ds));

You can specify any MIME type that you want. The MimeBodyPart object can then be added to a MimeMultipart object in the usual way.

Note that if you create a ByteArrayDataSource with an InputStream, it first copies all of the data in the stream into memory. This is necessary because a DataSource needs to be able to supply multiple InputStream objects so that Jakarta Mail can read the data once to determine what Content-Transfer-Encoding is appropriate, and then read the data again to include the data in the message.

Q: Can I read or send a Microsoft Office document using Jakarta Mail?
A: Jakarta Mail can read a Microsoft Office document as an attachment and save that document in a file. Likewise, Jakarta Mail can attach a Microsoft Office document to a message and send it as an attachment. Use the MimeBodyPart saveFile and attachFile methods. To process the content of a Microsoft Office document you'll need a separate library such as Apache POI.

Q: How do I create or process calendar appointments?
A: The iCal4j project provides an API that might be useful. More information about how different products, such as Microsoft Outlook, support calendar appointments is available here. This blog entry might also be helpful.

Q: When should I use Session.getDefaultInstance and when should I use Session.getInstance?
A: Almost all code should use Session.getInstance. The Session.getDefaultInstance method creates a new Session the first time it's called, using the Properties that are passed. Subsequent calls will return that original Session and ignore any Properties you pass in. If you want to create different Sessions with different properties, Session.getDefaultInstance won't do that. If some other code in the same JVM (e.g., in the same app server) has already created the default Session with their properties, you may end up using their Session and your properties will be ignored. This often explains why your property settings seem to be ignored. Always use Session.getInstance to avoid this problem.

Q: What is "disconnected support"?
A: A mail client supporting disconnected operation will allow the user to access messages in a remote message store (e.g., IMAP), cache (parts of) some of those messages locally, and break the connection to the server. While in this disconnected state, the mail client can access the messages that have been cached, possibly deleting them or saving them to other folders. When the mail client next connects to the remote message store, the changes made locally will be synchronized with the remote store. Similarly, disconnected support may allow the client to "send" messages when there is no connection to the server, with the messages being queued until a connection to the server is available. See also RFC 1733 and RFC 4549.

Q: How do I support disconnected operation using the Jakarta Mail APIs?
A: The Jakarta Mail API specification defines interfaces that can be used by a mail client to support disconnected operation. Our IMAP provider implements these interfaces (the UIDFolder interfaces).

Q: How do I send secure email using the Jakarta Mail APIs?
A: The Jakarta Mail APIs currently have no support for sending or receiving secure email. The architecture of the Jakarta Mail APIs allows such support to be easily added later, by us or by third parties. Please browse our Third Party Products page for solutions from other vendors. The most popular third party solution is the Bouncy Castle library.

Q: The writeTo() method generates message text with lines that are neither the canonical MIME representation of the data (i.e., using CRLF to terminate lines), nor using the canonical line separator of my platform (e.g., "\n" on UNIX). How do I get either of these representations if I need them?
A: In either case you'll need to create an appropriate FilterOutputStream to hand to writeTo(). The FilterOutputStream will need to accept lines with any of the common line terminators and write out lines with only the desired line terminator. The following are examples of such filters. NewlineOutputStream converts to the local platform's line terminator and is useful when writing a message to a file. CRLFOutputStream converts to the MIME canonical CRLF line terminator and is useful when the canonical MIME format is needed (e.g., to compute a digital signature).

Q: Can I use the Jakarta Mail APIs to implement a mail server?
A: The Jakarta Mail APIs were not intended to help you implement a mail server. Nonetheless, some of the utility classes, such as the MIME message parsing classes, might be of use to you. In general you'll find that the Jakarta Mail API errs on the side of "simple" instead of "robust". That's appropriate for a mail client, but a mail server would likely make different tradeoffs.

Q: Can I use the Jakarta Mail APIs to add new user accounts to my mail server, remove user accounts from my mail server, or change the passwords for user accounts on my mail server?
A: The Jakarta Mail API does not include any facilities for adding, removing, or changing user accounts. There are no standards in this area; every mail server handles this differently.

Q: Can I use the Jakarta Mail APIs to access my address book on my mail server?
A: The Jakarta Mail API does not include any facilities for accessing an address book. There are no standards in this area; every mail server handles this differently. If you can figure out how your server does it, you might be able to find a Java API to access it. For example, if your server stores address books in LDAP, you could use the JNDI API to access it.

Q: Why doesn't the MimeMessage class implement Serializable so that I can serialize a message to disk and read it back later?
A: The Jakarta Mail API was designed to layer on top of existing email systems, using existing message formats. The ability to use Java serialization was neither essential nor useful for such implementations, and thus was not considered a goal of the Jakarta Mail API.

The hard part about serializing a Message is retaining the pointers to the Folder, Store, and Session. If you only want to save the content of the message, and not the object itself, the writeTo method of a message gives you everything you need. If you want to create an entire email system based on serialized messages, you should be able to subclass Message et. al. and implement Serializable in your subclass.

If you want to serialize other objects of your own that reference MimeMessages, the writeObject method of your object can use the writeTo method of MimeMessage, and the readObject method of your object can use the MimeMessage constructor that takes an InputStream. Your class will need to provide a Session when constructing the MimeMessage.

Q: How do I write a Service Provider?
A: Please read the Service Provider documentation for details. In general, if you want to write a Store provider, you subclass javax.mail.Store, javax.mail.Folder, possibly javax.mail.Message and a few others. For a Transport provider, you subclass javax.mail.Transport, possibly javax.mail.Message and a few others. Then you add the entry describing your provider to the javamail.providers registry. If you're interested in writing a service provider for a protocol or messaging system not currently supported by the Jakarta Mail API implementation, please contact us at mail-dev@eclipse.org.

Q: I'm having trouble logging into my Microsoft Exchange server, even though I'm sure I'm using the correct username and password, what could I be doing wrong?
A: When logging in to Exchange you need to use a username that's more than your simple login name. For example, if your email address is "J.User@server.com", your Windows NT login name is "juser", your NT domain name is "dom", and your Exchange mailbox name is "Joe User", then you would need to use a username of "dom\juser\J.User" when logging in using Jakarta Mail.

Note also that there's a bug in Exchange 2007. The Exchange server advertises that it supports AUTH=PLAIN, even though this Exchange documentation claims that it's not supported. This causes Jakarta Mail to choose PLAIN authentication, which will always fail. To work around this Exchange bug, set the session property "mail.imap.auth.plain.disable" to "true". (Change "imap" to "imaps" if you're using the "imaps" protocol.)

Q: How do I encode a binary file before sending it and how do I decode it when I receive it?
A: You don't need to! Jakarta Mail will automatically determine an appropriate encoding to use for your message parts before sending the message, and will automatically decode message parts when reading them. The getInputStream method will return the decoded data.

Q: If I don't need to encode and decode attachments myself, when should I use the MimeUtility methods?
A: The MimeUtility methods are useful in cases that Jakarta Mail doesn't handle automatically for you. One such case that occurs frequently is encoding of filenames. The base MIME spec does not allow header parameter values (such as the filename parameter) to be encoded in the same way that (e.g.) the Subject header may be encoded. This restricts parameter values, and thus filenames, to ASCII. However, some mailers actually do encode non-ASCII filenames using the MIME text encoding. Applications that wish to interoperate with such non-standard mailers can use the encodeText method to encode filenames before calling the MimeBodyPartsetFileName method, and can use the decodeText method to decode returned filenames. See also this entry below if you need to encode filenames.

Q: I have data that's already encoded in (e.g.) base64, how do I tell Jakarta Mail to send this data without re-encoding it?
A: Use the PreencodedMimeBodyPart class, new in Jakarta Mail 1.4.

Q: Even though Jakarta Mail does all the encoding and decoding for me, I need to manually control the encoding for some body parts.
A: In the rare case that you need to control the encoding, there are several ways to override Jakarta Mail's default behavior. A simple approach is as follows. After creating the entire message, call msg.saveChanges() and then use something like mbp.setHeader("Content-Transfer-Encoding", "base64") to force base64 encoding for the given body part.

Another approach is to subclass MimeBodyPart and override the updateHeaders method so that it first calls super.updateHeaders() and then sets the Content-Transfer-Encoding header as above.

Q: Why doesn't Jakarta Mail properly encode and decode filenames in non-ASCII character sets?
A: The filename is stored as a parameter in MIME headers. Encoded filenames of the form =?ISO-8859-15?B?5OTkLUluZm8ucGRm?= are not part of the MIME spec. A filename of the form =?A?B?C?= is a perfectly valid filename, not an incorrectly encoded filename. Jakarta Mail does not encode and decode filenames by default because doing so would violate the MIME spec.

The base MIME spec does not allow for encoding parameters. RFC 2231 defines a new way to include encoded paramters, including filenames, in MIME headers. It is not compatible with the de facto way that many older applications illegally encode filenames. Even though Jakarta Mail supports RFC 2231, that alone does not allow Jakarta Mail to interoperate with these older programs. Most recent email programs support RFC 2231 and Jakarta Mail enables support for it by default starting in Jakarta Mail 1.5. To enable RFC 2231 support in older Jakarta Mail releases for encoded parameters, set the System properties "mail.mime.encodeparameters" and "mail.mime.decodeparameters" to "true".

If you choose to violate the MIME spec, in order to interoperate with other programs that also violate the MIME spec, Jakarta Mail gives you all the tools you need to do so. Starting with Jakarta Mail 1.4, setting the System properties "mail.mime.encodefilename" and "mail.mime.decodefilename" to "true" will cause Jakarta Mail to encode and decode the filename parameter using the non-RFC 2231 MIME encoding.

Applications using earlier versions of Jakarta Mail can use the following workaround to encode a filename:

mbp.setFileName(MimeUtility.encodeText(filename));

The workaround for decoding a filename is equally simple:

String filename = MimeUtility.decodeText(part.getFileName());

Again, this is primarily for applications using old versions of Jakarta Mail. Most applications should never need to use these methods.

Q: Why do I get an error such as java.net.SocketException: Permission denied: connect when connecting to my mail server using JDK7?
A: You may be running into an issue with support for IPv6. You can work around this problem by setting the System property "java.net.preferIPv4Stack" to "true". You can do this when starting your program using "java -Djava.net.preferIPv4Stack=true ..."

Debugging

Q: How do I debug my application that uses Jakarta Mail APIs?
A: Turn on session debugging by invoking the method setDebug(true) on the Session object in your code. That will cause debug information to be printed to the console, including a protocol trace. If you passed the System properties to the Session when you created it, you can simply run your program with java -Dmail.debug=true ...
If you think that you found a bug in Jakarta Mail, send us this trace along with a test case that reproduces the problem, the platform you are using, the version of the JDK you are using, and the name and version of the mail servers (IMAP, SMTP) that you are using.

Q: How do I debug problems connecting to my mail server?
A: The first thing to do when debugging such problems is to determine whether it's a Java problem or a networking problem. Use telnet to try to connect to the remote system. For example, if you're having trouble connecting to the POP3 server named mail.example.com, you would use:

telnet mail.example.com 110

If you're trying to connect to an SMTP server, use 25 instead of 110 for the port number. If you're trying to connect to an IMAP server use 143 for the port number.

If you get a greeting banner you can simply disconnect. If this works, your networking, name service, firewall, etc. are all set up correctly and your problem is most likely in your Java program.

If it doesn't work, you'll need to check your networking configuration or talk to your network administrator for help. Sometimes a firewall installed on your local machine or on your network will prevent you from connecting to the server. If telnet complains that it doesn't know the host name that you're using, most likely your name service (e.g., DNS) isn't properly configured to resolve internet host names. None of these problems are Jakarta Mail or Java problems.

Usually, when you get a low level SocketException when connecting, the problem is due to your networking configuration. Usually it's not a Java problem.

If you've succeeded in connecting with telnet, the next thing to do is to turn on Session debugging and get the protocol trace when Jakarta Mail tries to connect to the remote machine, as described above. This will often include more detailed error messages from the server that will indicate the real source of the problem.

Q: How do I debug problems connecting to my mail server using SSL?
A: Debugging SSL problems, and in particular certificate problems, can be difficult. The file SSLNOTES.txt includes some useful information. Angus Mail uses the JDK's JSSE API to provide SSL support. You can find information about debugging JSSE problems in the JSSE Reference Guide.

Q: How do I debug problems with Java security permissions?
A: You can set the java.security.debug System property to debug problems with Java security permissions. To get the possible values for setting that property, the following command will print a help message: java -Djava.security.debug=help MyClass

Reading mail, IMAP

Q: I tried running your demos against my IMAP server, but I get an error.
A: First verify that you indeed have an email account on the IMAP server. Check with your system administrator about it. Turn debug mode on, by invoking the method setDebug(true) on the session object in your code. This will cause the IMAP protocol trace to be dumped on your screen. Send us this trace. The trace will be very useful to us for identifying the problem. If you can, please send us vendor information about your IMAP server.

Q: I can read messages from my IMAP server with other mail clients, but even though I can connect to the server using Jakarta Mail, when I use Jakarta Mail to read some messages it fails. Doesn't that mean there's a bug in Jakarta Mail?
A: No, not usually. Most other mail clients make very little use of the rich IMAP protocol. They use the IMAP protocol as little more than a variant of the POP3 protocol, typically downloading the entire message to the client and parsing it in the client. This allows them to avoid all sorts of parsing and protocol bugs in many IMAP servers, but of course it comes at the cost of being less efficient because they don't take advantage of the IMAP protocol's ability to fetch only the parts of the message that are needed. These server bugs often manifest themselves as the following exception on the client: javax.mail.MessagingException: Unable to load BODYSTRUCTURE

The best approach when running into server bugs of this sort is to contact the vendor of the server and get them to fix their product. Contact mail-dev@eclipse.org and we'll help you pinpoint the problem so that you can report it to the server vendor. If you can't get a fix from the server vendor, the following technique will often allow you to work around these server bugs:

    // Get the message object from the folder in the
    // usual way, for example:
    MimeMessage msg = (MimeMessage)folder.getMessage(n);

    // Use the MimeMessage copy constructor to make a copy
    // of the entire message, which will fetch the entire
    // message from the server and parse it on the client:
    MimeMessage cmsg = new MimeMessage(msg);

    // The cmsg object is disconnected from the server so
    // setFlags will have no effect (for example).  Use
    // the original msg object for such operations.  Use
    // the cmsg object to access the content of the message.

In some cases, the server may be so badly broken that loading the envelope data is not possible, which can cause the above workaround to fail because internally it first fetches the message flags and message size from the server. In that case, the following approach will usually work:

    // Get the message object from the folder in the
    // usual way, for example:
    MimeMessage msg = (MimeMessage)folder.getMessage(n);

    // Copy the message by writing into a byte array and
    // creating a new MimeMessage object based on the contents
    // of the byte array:
    ByteArrayOutputStream bos = new ByteArrayOutputStream();
    msg.writeTo(bos);
    bos.close();
    SharedByteArrayInputStream bis =
		    new SharedByteArrayInputStream(bos.toByteArray());
    MimeMessage cmsg = new MimeMessage(session, bis);
    bis.close();

    // The cmsg object is disconnected from the server so
    // setFlags will have no effect (for example).  Use
    // the original msg object for such operations.  Use
    // the cmsg object to access the content of the message.

Q: The IMAP provider seems to lose data when I fetch messages with large attachments.
A: This is due to bugs in the partial fetch implementation of your IMAP server. To workaround this server bug, set the "mail.imap.partialfetch" property to "false". Refer to NOTES.txt from the Jakarta Mail package for more information.

Q: Does the IMAP provider cache the retrieved data?
A: The IMAP provider fetches the data for a message from the server only when necessary. (The javax.mail.FetchProfile can be used to optimize this). The header and bodystructure information, once fetched, is always cached within the Message object. However, the content of a bodypart is not cached. So each time the content is requested by the client (either using getContent() or using getInputStream()), a new FETCH request is issued to the server. The reason for this is that the content of a message could be potentially large, and if we cache this content for a large number of messages, there is the possibility that the system may run out of memory soon since the garbage collector cannot free the referenced objects. Clients should be aware of this and must hold on to the retrieved content themselves if needed.

Q: I want to move messages between folders. Should I use appendMessages() or copyMessages()?
A: Use copyMessages() if the messages to be copied/moved belong to the folder on which this method is being invoked. This is because some implementations can optimize this operation if the source and destination folder belong to the same backend Store. Otherwise, use appendMessages().

Q: Retrieving large message bodies seems inefficient at times.
A: If you are using the IMAP provider, you could try increasing the mail.imap.fetchsize property (the current default is 16k). This will cause data to be fetched from the server in larger chunks. Note that you risk the possibility of the JVM running out of memory when you do this.

Q: I get OutOfMemory errors when loading this large binary attachement.
A: Increase the maximum JVM heapsize at startup. Use the "-mx" option if using the standard JVM from Oracle. Don't keep references to the "content" of messages not being used. In certain cases, you could try streaming the message content (using getInputStream()) as raw bytes, use and then discard the used data chunks.

Q: Why do I get the UnsupportedDataTypeException when I invoke getContent() on a bodypart?
A: The getContent() method returns a Java object that represents the bodypart content. For this to work, a JAF DataContentHandler corresponding to the content's MIME type must be registered. Otherwise, the UnsupportedDataTypeException will be thrown. In this case, you can use the getInputStream() method to retrieve the content as a stream of bytes. See the JAF docs for details on how to create and register your own DataContentHandlers.

Q: Why do I get the UnsupportedEncodingException when I invoke getContent() on a bodypart that contains text data?
A: Textual bodyparts (i.e., bodyparts whose type is "text/plain", "text/html", or "text/xml") return Unicode String objects when getContent() is used. Typically, such bodyparts internally hold their textual data in some non Unicode charset. Jakarta Mail (through the corresponding DataContentHandler) attempts to convert that data into a Unicode string. The underlying JDK's charset converters are used to do this. If the JDK does not support a particular charset, then the UnsupportedEncodingException is thrown. In this case, you can use the getInputStream() method to retrieve the content as a stream of bytes. For example:

    String s;
    if (part.isMimeType("text/plain")) {
	try {
	    s = part.getContent();
	} catch (UnsupportedEncodingException uex) {
	    InputStream is = part.getInputStream();
	    /*
	     * Read the input stream into a byte array.
	     * Choose a charset in some heuristic manner, use
	     * that charset in the java.lang.String constructor
	     * to convert the byte array into a String.
	     */
	    s = convert_to_string(is);
	} catch (Exception ex) {
	    // Handle other exceptions appropriately
	}
    }

There are some commonly used charsets that the JDK does not yet support. You can find support for some of these additional charsets in the JCharset package at http://www.freeutils.net/source/jcharset/.

You can also add an alias for an existing charset already supported by the JDK so that it will be known by an additional name. You can create a charset provider for the "bad" charset name that simply redirects to an existing charset provider; see the following code. Create an appropriate CharsetProvider subclass and include it along with the META-INF/services file and the JDK will find it. Obviously you could get significantly more clever and redirect all unknown charsets to "us-ascii", for instance.

==> UnknownCharsetProvider.java <==
import java.nio.charset.*;
import java.nio.charset.spi.*;
import java.util.*;

public class UnknownCharsetProvider extends CharsetProvider {
     private static final String badCharset = "x-unknown";
     private static final String goodCharset = "iso-8859-1";

     public Charset charsetForName(String charset) {
         if (charset.equalsIgnoreCase(badCharset))
             return Charset.forName(goodCharset);
         return null;
     }

     public Iterator<Charset> charsets() {
         return Collections.emptyIterator();
     }
}

==> META-INF/services/java.nio.charset.spi.CharsetProvider <==
UnknownCharsetProvider

Q: How do I process all the messages in an IMAP folder and add a listener to wait for the arrival of new messages? [new!]
A: Open the folder, process all the messages in the folder, and check whether new messages have arrived (the message count has increased). If so, loop. If not, add the listener, then wait for new messages (e.g., by calling the idle method).

Part of the key to understanding how this works is understanding when the server is allowed to notify the client of new messages, and when Jakarta Mail will see those notifications. Between getting the number of messages and adding the listener, Jakarta Mail won't see any notifications of new messages. By the time you do an operation that will allow Jakarta Mail to see the notification, the listener will be in place.

The following code illustrates the general approach. Many details have been omitted.

    folder.open(Folder.READ_WRITE); // or READ_ONLY

    // first batch of messages
    int start = 1;
    int end = folder.getMessageCount();
    while (start <= end) {
	Message[] msgs = folder.getMessages(start, end);
	for (Message msg : msgs)
	    processMessage(msg);
	// new messages that have arrived
	start = end + 1;
	end = folder.getMessageCount();
    }
    // processed all messages

    // add MessageCountListener to listen for new messages
    folder.addMessageCountListener(new MessageCountAdapter() {
	public void messagesAdded(MessageCountEvent ev) {
	    Message[] msgs = ev.getMessages();
	    for (Message msg : msgs)
		processMessage(msg);
	}
    });

    // wait for new messages
    for (;;)
	((IMAPFolder)folder).idle();

Sending mail, SMTP

Q: How do I reply to a message?
A: To reply to a message, use the reply method on the Message object. This method will return a new object with the headers set appropriately for a reply. You'll need to supply the content of the message yourself. If you have the content of the original message as a String, you can use a simple method such as the following to create the prototypical reply text, which inserts "> " in front of each line:

    String text = (String)msg.getContent();
    Message reply = msg.reply();
    String replyText = text.replaceAll("(?m)^", "> ");
    // allow user to edit replyText,
    // e.g., using a Swing GUI or a web form
    reply.setText(replyText);

Q: How do I forward a message?
A: The approach used to forward a message depends on how you want to present the forwarded message. It's straightforward to create a new MimeMessage, address it appropriately, and attach an existing message as an attachment to the new message. To attach the original message to the new message, use code such as:

    MimeMessage msg = new MimeMessage(session);
    // set To, From, Subject, Date, etc.
    MimeMultipart mp = new MimeMultipart();
    // create a body part to contain whatever text you want to include
    MimeBodyPart mbp = new MimeBodyPart();
    mbp.setText("Here's the forwarded message\n");
    mp.addPart(mbp);
    // create another body part to contain the message to be forwarded
    MimeBodyPart fmbp = new MimeBodyPart();
    // forwardedMsg is the MimeMessage object you want to forward
    // as an attachment
    fmbp.setContent(forwardedMsg, "message/rfc822");
    fmbp.setDisposition(Part.ATTACHMENT);
    mp.addPart(fmbp);
    msg.setContent(mp);

If instead you want to create the new message with the text of the original message included in the new message, to forward the message "inline", you can use an approach such as the following:

    String text = (String)forwardedMsg.getContent();
    String forwardedText = String.format(
	"\n\n-------- Original Message --------\n" +
	"Subject: %s\nDate: %s\nFrom: %s\nTo: %s\n",
	forwardedMsg.getSubject(),
	forwardedMsg.getSentDate(),
	forwardedMsg.getFrom()[0],
	formatAddressList(
	  forwardedMsg.getRecipients(Message.RecipientType.TO)));
    // allow user to edit forwardedText,
    // e.g., using a Swing GUI or a web form
    msg.setText(forwardedText);

(You'll have to write the formatAddressList method using the toUnicodeString method of InternetAddress. You'll also want to include appropriate error checking and test for null values.)

Q: How do I send HTML mail?
A: There are a number of demo programs included with the distribution that show how to send HTML mail. If you want to send a simple message that has HTML instead of plain text, see the sendhtml.java program in the demo directory. If you want to send an HTML file as an attachment, see the sendfile.java example that shows how to send any file as an attachment.

Q: How do I send mail with formatted text using different fonts and colors?
A: The simplest approach is to send a message using HTML text. See above.

Q: How do I send mail with both plain text as well as HTML text so that each mail reader can choose the format appropriate for it?
A: You'll want to send a MIME multipart/alternative message. You construct such a message essentially the same way you construct a multipart/mixed message, using a MimeMultipart object constructed using new MimeMultipart("alternative"). You then insert the text/plain body part as the first part in the multpart and insert the text/html body part as the second part in the multipart. You'll need to construct the plain and html parts yourself to have appropriate content. See RFC2046 for details of the structure of such a message.

Q: How do I send HTML mail that includes images? [updated!]
A: The simplest approach is to send HTML text with image tags that reference images on a public web site. In this approach the images aren't actually included in the message, and so won't be visible if the user is not connected to the Internet when they read the message. Note also that some mailers will refuse to display images that are on remote sites.

Another approach is to include the image data inline in the html content of the message, for example:

	<img src="data:image/jpeg;base64,base64-encoded-data-here" />

This works best for relatively small images.

Alternatively, you can construct a MIME multipart/related message. See RFC2387 for details of the structure of such a message. A simple example follows:

        Multipart multipart = new MimeMultipart("related");

        MimeBodyPart htmlPart = new MimeBodyPart();
        // messageBody contains html that references image
        // using something like <img src="cid:XXX"> where
        // "XXX" is an identifier that you make up to refer
        // to the image
        htmlPart.setText(messageBody, "utf-8", "html");
        multipart.addBodyPart(htmlPart);

        MimeBodyPart imgPart = new MimeBodyPart();
        // imageFile is the file containing the image
        imgPart.attachFile(imageFile);
        // or, if the image is in a byte array in memory, use
        // imgPart.setDataHandler(new DataHandler(
        //      new ByteArrayDataSource(bytes, "image/whatever")));

        // "XXX" below matches "XXX" above in html code
        imgPart.setContentID("<XXX>");
        multipart.addBodyPart(imgPart);

        message.setContent(multipart);

For more advice, see How to Embed Images in Your Emails: The Facts

Q: What's the difference between the Transport methods send and sendMessage?
A: The send() method is a static method and can be used without needing an instance of a Transport object. It is intended for the common, simple case of sending a single message using the default transport. Internally, the send() method will first call the saveChanges() method on the message. It will then create an appropriate new Transport object, call the Transport's connect() method, call the Transport's sendMessage() method to actually send the message, call the Transport's close() method, and finally abandon the new instance of the Transport object to be collected by the garbage collector. (Actually, it's rather more complicated than that, but that's the general idea.)

As you can see, the static send() convenience method is built on the more general per-instance sendMessage() method. There are a number of reasons for an application to use the sendMessage() method directly. The most common reasons are to improve performance by sending more than one message during a single connection, or to manually manage the connection so as to provide authentication information.

Q: When I try to send a message I get an error like SMTPSendFailedException: 530, Address requires authentication. [updated!]
A: You need to authenticate to your SMTP server. The package javadocs for the com.sun.mail.smtp package describe several methods to do this. The easiest is to replace the call Transport.send(msg); with Transport.send(msg, username, password);.

You'll have to supply the appropriate username and password needed by your mail server.

Q: How do I use SSL or TLS when connecting to my mail server? [new!]
A: To use SMTP over SSL, set the mail.smtp.ssl.enable property in the Session properties. To use the STARTTLS command set the mail.smtp.starttls.enable property in the Session properties. For example:

    Properties props = new Properties();
    props.setProperty("mail.smtp.host", host);
    props.setProperty("mail.smtp.ssl.enable", "true");
    // or: props.put("mail.smtp.starttls.enable", "true");
    Session session = Session.getInstance(props);
    MimeMessage msg = new MimeMessage(session);
    // set message content here
    Transport.send(msg, username, password);

Q: I need to authenticate to my SMTP server so I call trans.connect(host, user, password) and then trans.send(msg) to send the message, but it's not working.
A: You should call trans.sendMessage(msg, addrs) to send the message. As described above, the send method is a static convenience method that acquires its own Transport object and creates its own connection to use for sending; it does not use the connection associated with any Transport object through which it is invoked.

Q: I modified this message, but the headers do not reflect the changes.
A: You should call saveChanges() after you create a new message or modify an existing message. This will cause the headers to be reset and reflect your changes. Note that the Transport.send(Message) method calls this implicitly. So if all you are doing is sending the modified message, you can skip calling saveChanges() yourself. saveChanges() is a potentially expensive operation (especially for large or deeply nested messages), so call it only when needed.

Q: I set a particular value for the Message-ID header of my new message, but when I send this message that header is rewritten.
A: A new value for the Message-ID field is set when the saveChanges method is called (usually implicitly when a message is sent), overwriting any value you set yourself. If you need to set your own Message-ID and have it retained, you will have to create your own MimeMessage subclass, override the updateMessageID method and use an instance of this subclass.

class MyMessage extends MimeMessage {
    ...

    protected void updateMessageID() throws MessagingException {
	setHeader("Message-ID", "my-message-id");
    }
    ...
}

Q: Why do I get an UnsupportedDataTypeException when sending this new message that I created?
A: You probably set some content for your message using the setContent(Object o, String type) method. For this to work, there must be a JAF DataContentHandler registered for the given "type". If not, you will get the UnsupportedDataTypeException. See the JAF documents for more information. In most cases the simplest workaround is to use a ByteArrayDataSource as described above.

Q: How can I explicitly set the SMTP FROM: attribute when sending a message?
A: The mail.smtp.from property can be used to set the SMTP FROM: attribute. If this property if absent, the message's From attribute is used. If multiple threads need to send mail simultaneously, and each needs to set the From attribute, each thread should use its own Session object with its own Properties object. The mail.smtp.from property can then be set on each Properties object for each Session (and thus each thread) independently. Alternatively, each thread can use the com.sun.mail.SMTPMessage class. The setEnvelopeFrom method on that class can be used to set this value. With this approach, all threads can use the same Session.

Q: I want to repeatedly send messages, to a different set of recipients each time. But invoking Transport.send(Message) causes a new Transport session to be established each time. This is suboptimal in this case, so how do I get around this?
A: Create an instance of the appropriate Transport object, connect to it and invoke the sendMessage() method repeatedly. For example:

    MimeMessage msg = ...;
    // construct message
    msg.saveChanges();
    Transport t = session.getTransport("smtp");
    t.connect();

    for (int i = 0; .....) {
	t.sendMessage(msg, new Address[] { recipients[i] });
    }

    t.close();

Q: I get "MessagingException: 501 HELO requires domain address" when trying to send a message.
A: The SMTP provider uses the results of InetAddress.getLocalHost().getHostName() in the SMTP HELO command. If that call fails to return any data, no name is sent in the HELO command. Check your JDK and name server configuration to ensure that that call returns the correct data. You may also set the "mail.smtp.localhost" property to the name you want to use for the HELO command.

Q: I get "Must issue a STARTTLS command first" when trying to send a message.
A: Your SMTP server wants you to switch from a plain text connection to a secure connection using the STARTTLS command. You can enable use of this command by setting the Session property "mail.smtp.starttls.enable" to "true". This will cause the SMTP protocol provider to issue the STARTTLS command after connecting to the server. See the file SSLNOTES.txt for additional information. Also, the javadocs for the com.sun.mail.smtp package has more information on the properties that can be set.

Note that your server is most likely also going to want you to authenticate, as described in this entry.

Q: If I send a message to a bad address, why don't I get a SendFailedException or TransportEvent indicating that the address is bad?
A: There is no end-to-end address verification on the Internet. Often a message will need to be forwarded to several mail servers before reaching one that can determine whether or not it can deliver the message. If a failure occurs in one of these later steps, the message will typically be returned to the sender as undeliverable. A successful "send" indicates only that the mail server has accepted the message and will try to deliver it.

Q: When a message can't be delivered, a failure message is returned. How can I detect these "bounced" messages?
A: While there is an Internet standard for reporting such errors (the multipart/report MIME type, see RFC1892), it is not widely implemented yet. RFC1211 discusses this problem in depth, including numerous examples.

In Internet email, the existence of a particular mailbox or user name can only be determined by the ultimate server that would deliver the message. The message may pass through several relay servers (that are not able to detect the error) before reaching the end server. Typically, when the end server detects such an error, it will return a message indicating the reason for the failure to the sender of the original message. There are many Internet standards covering such Delivery Status Notifications but a large number of servers don't support these new standards, instead using ad hoc techniques for returning such failure messages. This makes it very difficult to correlate a "bounced" message with the original message that caused the problem. (Note that this problem is completely independent of Jakarta Mail.) Jakarta Mail now includes support for parsing Delivery Status Notifications; see the NOTES.txt file in the Jakarta Mail package for details.

There are a number of techniques and heuristics for dealing with this problem - none of them perfect. One technique is Variable Envelope Return Paths, described at http://cr.yp.to/proto/verp.txt. The use of VERP with Jakarta Mail and Apache James is described here.

Q: When I construct an InternetAddress object, why don't I get an exception if the address is illegal?
A: The InternetAddress class only checks the syntax of the address. As discussed above, the InternetAddress class is not able to determine whether the address actually exists as a legal address. It is not even possible to verify the host name if the application is running behind a firewall or isn't currently connected to the Internet.

Q: When I try to send a message, why do I get javax.mail.SendFailedException: 550 Unable to relay for my-address?
A: This is not a Jakarta Mail problem. This is an error reply from your SMTP mail server. It indicates that your mail server is not configured to allow you to send mail through it. Typically, mail servers for an organization will be configured to allow mail from within the organization to be sent to other addresses within the organization, or to addresses external to the organization. It will also typically allow mail coming from an address external to an organization to be sent to addresses within the orgnaization. What it will typically not allow is mail coming from an address external to the organization to be sent (relayed) to another address also external to the organization. The configuration of the mail server determines whether such relaying is allowed, and which addresses are considered internal vs. external. Often mail servers will require you to authenticate before they will relay messages.

Q: When I try to send a message to (for example) Yahoo, why do I get an error that says "connection refused"?
A: The host you're trying to connect to is most likely not running a mail server. If you're trying to connect to a web mail service such as Yahoo, you can't usually use the web host name (e.g., "yahoo.com") since this host doesn't run the required mail server. Instead, you'll need to learn the name of the host running the required mail server; contact your web mail provider for this information. You can find this information for Yahoo at http://help.yahoo.com/help/us/mail/pop/pop-02.html. Note that some web mail providers don't offer this service, instead allowing you to access your mail only through a browser.

If you're not trying to connect to a web mail account, but instead are trying to connect to a host on your local network, then most likely the host you're trying to connect to is not running a mail server. Sometimes this will occur if you forget to set (for example) the "mail.smtp.host" property, which will cause you to try to connect to "localhost". Most Windows machines do not run a mail server, although many UNIX (Solaris, Linux, etc.) machines do. Thus, attempts to connect to "localhost" on Windows machines will usually fail with a "connection refused" error.

Q: When sending mail, why does it fail with an exception that includes a message something like 553 To send mail, first check your mail with a valid POP account?
A: In order to prevent their use to send spam, some mail servers will require you to have a valid POP3 account and require you to login to that account before they'll let you send mail through that mail server. This is simple to handle in Jakarta Mail. When you know that you're dealing with such a mail server, make sure you connect to your POP3 Store on that mail server before sending mail.

POP3

Q: I want to delete messages on a POP3 server. I set the DELETED flag on those messages. Then I call the expunge() method, but I get a MethodNotSupportedException. How do I delete messages when I use the POP3 provider?
A: The expunge() method is not supported by the POP3 provider. Instead, after marking the messages to be deleted by setting the DELETED flag on those messages, close the folder with the expunge flag set to true. That is, invoke folder.close(true).

Q: How can I retrieve POP3 UIDLs in messages obtained from the POP3 provider?
A: This is possible with the POP3 provider. See the com.sun.mail.pop3 package documentation for details.

Q: How can I tell which messages are new with POP3?
A: The POP3 protocol doesn't provide support for any permanent flags so the RECENT flag is of no use. The com.sun.mail.pop3 package documentation discusses several strategies for dealing with this problem.

Q: Why does hasNewMessages() always return false when using POP3?
A: The POP3 protocol provides no way to determine whether a folder has new messages.

Q: I set up a MessageCountListener (as demonstrated in the monitor program) but I'm never notified of new mail in my POP3 INBOX.
A: The POP3 protocol does not allow the client to see new messages delivered to the INBOX while the INBOX is open. The application must close the INBOX and reopen it in order to see any new messages. You will never be notified of new mail using the MessageCountListener interface with POP3. See the com.sun.mail.pop3 package documentation for more information.

Q: Why does getReceivedDate() return null when using POP3?
A: The POP3 protocol does not provide information about when a message was received. It may be possible to guess at the received date by looking at some message headers such as the Received header, but this is not very reliable.

Q: When using POP3 I get complaints about the SocketFetcher class.
A: Most likely you have more than one version of pop3.jar or jakarta.mail.jar in your CLASSPATH. Check the setting of CLASSPATH and check the "jre/lib/ext" directory in the JDK.

Q: When using POP3 I get complaints about the contentStream field.
A: The error usually looks like:

java.lang.NoSuchFieldError: contentStream at
com.sun.mail.pop3.POP3Message.getContentStream(POP3Message.java:115)

As above, you've mixed versions of the POP3 provider and jakarta.mail.jar. You probably have an older version of jakarta.mail.jar in your CLASSPATH before the newer version that includes the POP3 provider.

Q: How do I access or create folders other than INBOX on my POP3 server?
A: You can't. POP3 servers only support a single mailbox per user. Most mail readers that use POP3 also maintain a local message store into which they copy incoming messages (from the POP3 INBOX) and allow you to file messages in other folders. See this item for more information about local store providers.

Q: Why does the getSize method return a negative number when using POP3?
A: Your POP3 server is broken. The POP3 provider uses the TOP command to fetch the headers for the message and the LIST command to determine the size of the entire message. It then subtracts the two values to determine the size of the message body. If the server reports the size of the entire message incorrectly, you may get a negative number. You can set the property "mail.pop3.disabletop" to "true" to disable the use of the TOP command, but note that this will cause any access to the message headers to fetch the entire message.

Q: I'm having problems using POP3 with Microsoft Exchange.
A: Some versions of Microsoft Exchange do not implement the POP3 protocol properly. They return different headers from the TOP command than they do from the RETR command. This can cause all sorts of strange failures in Jakarta Mail. One solution is to disable use of the TOP command, as described above. Another approach that works in some cases os to tell Jakarta Mail to forget about the headers it retrieved using the TOP command after retrieving the entire message using the RETR command. To do this, set the property "mail.pop3.forgettopheaders" to "true".

Jakarta Mail in servlets

Q: Can I use Jakarta Mail in servlets?
A: Yes, see the Installation and Configuration section above for more details. The Jakarta Mail API is also a required part of the Java Platform, Enterprise Edition (Java EE). No installation or configuration is necessary when using Jakarta Mail in a Java EE product, it's just there!

Q: My web application uses Jakarta Mail to attach and send a file that the user specifies, but my application can't find the file.
A: If the user species the filename in an HTML form in the browser, the filename is normally the name of a file on the user's machine, not on the server. The file will need to be uploaded to the server before Jakarta Mail can access it. The Apache Jakarta Commons FileUpload package can help.

Jakarta Mail in applets

Q: Can I use Jakarta Mail in applets?
A: Yes, Jakarta Mail will work in applets in browsers that support the required JDK version. The Java Plug-in may be required to provide such support.

Q: What are the security implications of using Jakarta Mail in an applet?
A: One of the biggest issues with using Jakarta Mail in applets is the default applet security restrictions. These restrictions only allow applets to connect to the host from which they were loaded. Thus, for such applets to use Jakarta Mail, the mail server will need to be located on the same machine as the web server from which the applet is loaded. You can find more information on the applet security model here.

Q: Ok, maybe I really don't want to use an applet, what should I do instead?
A: In general, we recommend use of a web application to collect a mail message and send it using Jakarta Mail. The demo servlet included in the Jakarta Mail download package illustrates this approach. The Email Web Application demo program on the Oracle Technology Network illustrates another approach using JavaServer Pages.

Eclipse Angus

Angus - Mail

Jakarta Mail FAQ

General

Installation and Configuration

Programming

Debugging

Reading mail, IMAP

Sending mail, SMTP

POP3

Jakarta Mail in servlets

Jakarta Mail in applets

General

Installation and Configuration

Programming

Debugging

Reading mail, IMAP

Sending mail, SMTP

POP3

Jakarta Mail in servlets

Jakarta Mail in applets

Breadcrumbs

Jakarta Mail FAQ

General

Installation and Configuration

Programming

Debugging

Reading mail, IMAP

Sending mail, SMTP

POP3

Jakarta Mail in servlets

Jakarta Mail in applets

General

Installation and Configuration

Programming

Debugging

Reading mail, IMAP

Sending mail, SMTP

POP3

Jakarta Mail in servlets

Jakarta Mail in applets